View M74HC590M1R_499455.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

M74HC590
8 BINARY COUNTER REGISTER WITH 3 STATE OUTPUT
s
s
s
s
s
s
s
HIGH SPEED: fMAX = 61 MHz (TYP.) at VCC = 6V LOW POWER DISSIPATION: ICC = 4A(MAX.) at TA=25C HIGH NOISE IMMUNITY: VNIH = V NIL = 28 % VCC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = I OL = 6mA (MIN) for QA ~ QH OUTPUT |IOH| = IOL = 4mA (MIN) for RCO OUTPUT BALANCED PROPAGATION DELAYS: tPLH tPHL WIDE OPERATING VOLTAGE RANGE: VCC (OPR) = 2V to 6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 590
DIP
SOP
TSSOP
ORDER CODES
PACKAGE DIP SOP TSSOP TUBE M74HC590B1R M74HC590M1R T&R M74HC590RM13TR M74HC590TTR
DESCRIPTION The M74HC590 is an high speed CMOS 8-BIT BINARY COUNTER REGISTER (3 STATE) fabricated with silicon gate C2MOS technology. This device contains an 8-bit binary counter that feeds an 8-bit storage register. The storage register has parallel outputs. Separate clocks are provided for both the binary counter and storage register. The binary counter features a direct clear input CCLR and a count enable input CCKEN. For
cascading, a ripple carry output RCO is provided. Expansion is easily accomplished by tying RCO of the first stage to CCKEN of the second stage, etc. Both the counter and register clocks are positive edge triggered. If the user wishes to connect both clocks together, the counter state will always be one count ahead of the register. Internal circuitry prevents clocking from the clock enable. All inputs are equipped with protection circuits against static discharge and transient excess voltage.
PIN CONNECTION AND IEC LOGIC SYMBOLS
August 2001
1/15
M74HC590
INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
PIN No 1, 2, 3, 4, 5, 6, 7, 15 11 12 13 9 14 10 8 16 SYMBOL QA to QH CCK CCKEN RCK RCO G CCLR GND VCC NAME AND FUNCTION Outputs Counter Clock Input Counter Clock Enable Input Register Clock Input Ripple Carry Output Output Enable Input Counter Clear Input Ground (0V) Positive Supply Voltage
TRUTH TABLE
INPUTS OUTPUT G H L X X X X X X X X X X RCK X X CCLR X X X X L H H H CCKEN X X X X X L L H X CCK X X X X X Q OUTPUTS DISABLE Q OUTPUTS ENABLE COUNTER DATA IS STORED INTO REGISTER REGISTER STAGE IS NOT CHANGED COUNTER CLEAR ADVANCE ONE COUNT NO COUNT NO COUNT
X: Don't Care RCO = QA'*QB'*QC'*QD'*QE'*QF'*QG'*QH' (QA' to QH' : INTERNAL OUTPUTS OF THE COUNTER)
LOGIC DIAGRAM
2/15
M74HC590
LOGIC DIAGRAM
This logic diagram has not be used to estimate propagation delays
3/15
M74HC590
TIMING CHART
4/15
M74HC590
ABSOLUTE MAXIMUM RATINGS
Symbol VCC VI VO IIK IOK IO Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Source Sink Current per Output PIN (RCO) (QA - QH) Power Dissipation Storage Temperature Lead Temperature (10 sec) Parameter Value -0.5 to +7 -0.5 to VCC + 0.5 -0.5 to VCC + 0.5 20 20 25 35 70 500(*) -65 to +150 300 Unit V V V mA mA mA mA mW C C
ICC or IGND DC VCC or Ground Current PD Tstg TL
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied (*) 500mW at 65 C; derate to 300mW by 10mW/C from 65C to 85C
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VI VO Top tr, tf Supply Voltage Input Voltage Output Voltage Operating Temperature Input Rise and Fall Time VCC = 2.0V VCC = 4.5V VCC = 6.0V Parameter Value 2 to 6 0 to VCC 0 to VCC -55 to 125 0 to 1000 0 to 500 0 to 400 Unit V V V C ns ns ns
5/15
M74HC590
DC SPECIFICATIONS
Test Condition Symbol Parameter VCC (V) 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 VOH High Level Output Voltage (for QA to QH Outputs) 2.0 4.5 6.0 4.5 6.0 VOL Low Level Output Voltage (for RCO Output) 2.0 4.5 6.0 4.5 6.0 VOL Low Level Output Voltage (for QA to QH Outputs) 2.0 4.5 6.0 4.5 6.0 II IOZ Input Leakage Current High Impedance Output Leakage Current Quiescent Supply Current 6.0 6.0 6.0 IO=-20 A IO=-20 A IO=-20 A IO=-4.0 mA IO=-5.2 mA IO=-20 A IO=-20 A IO=-20 A IO=-6.0 mA IO=-7.8 mA IO=20 A IO=20 A IO=20 A IO=4.0 mA IO=5.2 mA IO=20 A IO=20 A IO=20 A IO=6.0 mA IO=7.8 mA VI = VCC or GND VI = VIH or VIL VO = VCC or GND VI = VCC or GND TA = 25C Min. 1.5 3.15 4.2 0.5 1.35 1.8 1.9 4.4 5.9 4.18 5.68 1.9 4.4 5.9 4.18 5.68 2.0 4.5 6.0 4.31 5.8 2.0 4.5 6.0 4.31 5.8 0.0 0.0 0.0 0.17 0.18 0.0 0.0 0.0 0.17 0.18 0.1 0.1 0.1 0.26 0.26 0.1 0.1 0.1 0.26 0.26 0.1 0.5 4 1.9 4.4 5.9 4.13 5.63 1.9 4.4 5.9 4.13 5.63 0.1 0.1 0.1 0.33 0.33 0.1 0.1 0.1 0.33 0.33 1 5 40 Typ. Max. Value -40 to 85C Min. 1.5 3.15 4.2 0.5 1.35 1.8 1.9 4.4 5.9 4.10 5.60 1.9 4.4 5.9 4.10 5.60 0.1 0.1 0.1 0.40 0.40 0.1 0.1 0.1 0.40 0.40 1 10 80 A A A V V V V Max. -55 to 125C Min. 1.5 3.15 4.2 0.5 1.35 1.8 Max. V Unit
VIH
High Level Input Voltage Low Level Input Voltage High Level Output Voltage (for RCO Output)
VIL
V
VOH
ICC
6/15
M74HC590
AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, Input tr = tf = 6ns)
Test Condition Symbol Parameter VCC (V) 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 CL (pF) TA = 25C Min. Typ. 25 7 6 30 8 7 56 19 16 53 21 18 48 17 14 60 21 18 39 13 11 51 17 14 28 14 12 13 52 61 36 9 8 32 8 7 44 11 9 76 19 16 Max. 60 12 10 75 15 13 165 33 28 175 35 30 145 29 25 185 37 31 105 21 18 135 27 23 105 21 18 5.2 26 31 100 20 17 75 15 13 100 20 17 175 35 30 0 0 0 125 25 21 95 19 16 125 25 21 220 44 37 0 0 0 Value -40 to 85C Min. Max. 75 15 13 95 19 16 205 41 35 220 44 37 180 36 31 230 46 39 130 26 22 170 34 29 130 26 22 4.4 22 26 145 29 25 110 22 19 150 30 26 255 51 43 0 0 0 -55 to 125C Min. Max. 90 18 15 115 23 20 250 50 43 265 53 45 220 44 37 280 56 48 160 32 27 205 41 35 160 32 27 ns Unit
tTLH tTHL Output Transition Time tTLH tTHL Output Transition Time (RCO) tPLH tPHL Propagation Delay Time (CCK - RCO) tPLH Propagation Delay Time (CCLR - RCO)
50
50
ns
50
ns
50
ns
tPLH tPHL Propagation Delay Time (RCK - Q)
50
ns
150
ns
tPZL tPZH High Impedance Output Enable Time
50
RL = 1 K
ns
150
RL = 1 K
ns
tPLZ tPHZ High Impedance Output Disable Time fMAX Maximum Clock Frequency Minimum Pulse Width (CCK, RCK) Minimum Pulse Width (CCLR) Minimum Set-up Time (CCKEN CCK) Minimum Set-up Time (CCK - RCK) Minimum Hold Time
50
RL = 1 K 6.6 33 39
ns
50
MHz
tW(L) tW(H) tW(L)
50
ns
50
ns
ts
50
ns
ts(H)
50
ns
th
50
ns
7/15
M74HC590
Test Condition Symbol Parameter VCC (V) 2.0 4.5 6.0 CL (pF) TA = 25C Min. Typ. 28 7 6 Max. 75 15 13
Value -40 to 85C Min. Max. 95 19 16 -55 to 125C Min. Max. 110 22 19 ns Unit
tREM
Minimum Removal Time (CCLR)
50
CAPACITIVE CHARACTERISTICS
Test Condition Symbol Parameter VCC (V) TA = 25C Min. Typ. 5 40 Max. 10 Value -40 to 85C Min. Max. 10 -55 to 125C Min. Max. 10 pF pF Unit
CIN CPD
Input Capacitance Power Dissipation Capacitance (note 1)
1) CPD is defined as the value of the IC's internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC
TEST CIRCUIT
TEST tPLH, tPHL tPZL, tPLZ tPZH, tPHZ
CL = 50pF/150pF or equivalent (includes jig and probe capacitance) R1 = 1K or equivalent RT = ZOUT of pulse generator (typically 50)
SWITCH Open VCC GND
8/15
M74HC590
WAVEFORM 1 : PROPAGATION DELAY, MINIMUM PULSE WIDTH (f=1MHz; 50% duty cycle)
WAVEFORM 2 : MINIMUM SETUP AND HOLD TIME (f=1MHz; 50% duty cycle)
9/15
M74HC590
WAVEFORM 3 : PROPAGATION DELAY TIME (f=1MHz; 50% duty cycle)
WAVEFORM 4 : MINIMUM SETUP AND HOLD TIME (f=1MHz; 50% duty cycle)
10/15
M74HC590
WAVEFORM 5 : MINIMUM PULSE WIDTH, REMOVAL TIME (f=1MHz; 50% duty cycle)
WAVEFORM 6 : OUTPUT ENABLE AND DISABLE TIME (f=1MHz; 50% duty cycle)
11/15
M74HC590
Plastic DIP-16 (0.25) MECHANICAL DATA
mm. DIM. MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 TYP. MAX. inch
P001C
12/15
M74HC590
SO-16 MECHANICAL DATA
DIM. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 9.8 5.8 1.27 8.89 4.0 5.3 1.27 0.62 8 (max.) 0.149 0.181 0.019 10 6.2 0.35 0.19 0.5 45 (typ.) 0.385 0.228 0.050 0.350 0.157 0.208 0.050 0.024 0.393 0.244 0.1 mm. MIN. TYP MAX. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.003 MIN. inch TYP. MAX. 0.068 0.007 0.064 0.018 0.010
PO13H
13/15
M74HC590
TSSOP16 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 b c D E E1 e K L 0 0.45 0.60 0.05 0.8 0.19 0.09 4.9 6.2 4.3 5 6.4 4.4 0.65 BSC 8 0.75 0 0.018 0.024 1 TYP MAX. 1.2 0.15 1.05 0.30 0.20 5.1 6.6 4.48 0.002 0.031 0.007 0.004 0.193 0.244 0.169 0.197 0.252 0.173 0.0256 BSC 8 0.030 0.004 0.039 MIN. TYP. MAX. 0.047 0.006 0.041 0.012 0.0089 0.201 0.260 0.176 inch
A
A2 A1 b e K c L E
D
E1
PIN 1 IDENTIFICATION
1
0080338D
14/15
M74HC590
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2000 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom (c) http://www.st.com
15/15

▲Up To Search▲

Price & Availability of M74HC590M1R

	To Download M74HC590M1R Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .